Thursday, 21 December 2017
Although the process of cleaning a swimming pool is tedious and sometimes time-consuming, it is one that ought to be a homeowner's top priority for financial and health reasons. Health concerns arise from the fact that murky and filthy pool waters are a common breeding ground for potentially harmful germs and bacteria. With regard to financial reasons, an ill-maintained and dirty pool might cost you a large sum of money in the long run since you may have to acquire professional pool cleaning and restoration services.
In view of these dirty swimming pool repercussions, the following cleaning swimming pool tips and troubleshooting guide will provide individuals residing in Singapore with information that will help them preserve clear and inviting swimming pools with ease.
Singapore Cleaning Swimming Pool Guide: Tips for Basic Cleaning
1-Controlling Mineral Deposits and Balancing Water pH Levels: A Silent “Blessing” for Singapore Residents
Although de-scaling and the control of mineral deposit stains are common swimming pool cleaning processes, Singapore residents (luckily) do not have to perform these cleaning swimming pool tasks because scale deposits and stains are caused when water contains excess levels of magnesium and calcium minerals (commonly referred to as hard water).
Since Singapore feature a high-tech water purification and desalinization plants and this water is distributed throughout the country via a centralized water supply, Singapore residents are assured that the water entering into their pools has a low mineral content (soft water) and has a balanced pH. Therefore, the process of checking and balancing pool water pH and controlling water mineral deposits (de-scaling) is not a pool cleaning requirement for Singapore residents.
2-Getting Rid of Pool Debris and Surface Grime
Surface Debris- To get rid of surface debris, pass a pool leaf skimmer over the pool’s water surface. The skimmer’s net will trap common surface debris such as foliage and leaves.
Sunken Debris- Sunken debris ought to be removed using a pool vacuum. For individuals with robotic pool vacuum cleaners, this is an easy task as it only requires immersing the device and placing it on the pool’s floor. Individuals who cannot afford the costly pool cleaning device can opt for a manual pool vacuum. It is vital that you follow the device’s instructional manual for unit set-up and use.
Grime- Grime typically builds-up on pool ladders, stairs, and side surfaces due to poor water circulation. To get rid of grime, scrub these areas using a pool brush on a weekly basis. A brush made out of nylon and stainless steel bristles is best for unpainted concrete pool surfaces. To scrub pool surfaces made from Gunite material, use a brush with stainless steel bristles. A nylon bristled brush should be used to scrub vinyl, painted concrete, and Fiberglass pool surfaces.
3-Chlorinating Your Pool
Chlorinating your pool water is the best way you can ensure that it is pathogen free, clean, and sanitary. Therefore, it important that you work to maintain a healthy chlorine level of between 1 and 3 ppm (parts per million). Before you can take on the task of chlorinating your pool water, you first need to purchase high-quality pool chlorine, determine your pool’s volume, and lastly, determine how much chlorine you need.
There are three types of pool chlorine options, namely, chlorinating tablets, liquid chlorine, and chlorinating granules.
Chlorinating liquid: This type of pool chlorine can be likened to typical household bleach. The main difference between the two is that liquid pool chlorine is approximately three times stronger than household bleach. Although it is easy to apply and effectively sanitize poll water, liquid chlorine can only be stored for a few weeks due to its short shelf life.
Chlorinating granules: Chlorinating granules offer pool cleaning benefits which are similar to those provided by chlorinating tablets. However, they require daily application.
Chlorinating tabs: This type of pool chlorine is available in 1 or 3-inch sizes and can be used in a floating dispenser or automatic chlorinator. They are considered to be the best for pool cleaning because they have a long shelf life and are slow-dissolving. This offers pool cleaners the benefit of not having to chlorinate their pool on a daily basis. They are a multifunctional pool cleaning resource as they function by shocking the water to eliminate contaminants, control the growth of algae, and kill bacteria.
When selecting chlorinating tabs, it is vital that you avoid those which require running water to dissolve as this will tempt you to use a skimmer basket and result in inadequate chlorine distribution. Also, avoid tablets which fall apart or crumble easily as this is a sign of poor quality.
-Determining your pool’s volume
In order to determine how much chlorine your pool requires, you need to figure out how many gallons of water your pool contains (water volume). The easiest way to do this is by using an online calculator, preferably one that can be located on a trustworthy pool supply house website.
-Determining the amount of chlorine your pool needs
Once you have ascertained your pool’s water volume, you should determine the amount of chlorine it needs. Using the pool chlorinating formula which recommends that one use an ounce of chlorine (provides 1 ppm) for 75 thousand gallons of pool water, calculate the exact amount of chlorine your pool needs.
Cleaning Swimming Pool Tips and Hacks that will help Maintain Pool Cleanliness
-Get rid of Oil on Pool Water Surface
If your pool is used on a regular basis, the accumulation of oils such as those found in a swimmer’s sunblock and suntan lotions can be a problem. To deal with such instances, toss a regular tennis ball into the pool. A standard tennis ball will work by sucking up any foreign chemicals and oils as it floats around the pool’s surface.
-Clean the filter at least 3 times per year
It is vital that you keep an eye out for the formation of cracks in the space between your pool deck and tiles. To seal visible cracks, place a few silicon beads in it as this will eliminate water migration and seepage. Pool water can weaken the integrity of your pool’s structure because it easily causes damage when allowed to seep through crevices and cracks.
-Keep your Pool Covered
It is of noteworthy importance to mention that the growth of algae in pool water is encouraged by animal and bird droppings. As such, covering your pool when it is not in use adequately prevents such situations.
Sunday, 27 August 2017
It is critical for you to keep your swimming pool maintained so everyone can enjoy it. A properly maintained pool will be beneficial in many ways:
· The water will be safer for everyone to swim around in. It will not be too difficult for people to swim in as it will not feel overly acidic or basic.
· Proper maintenance keeps a pool from suffering from corrosion. This includes corrosion to a pump, liner and other parts.
· The filter and other features around the pool will also work properly and keep water flowing when it is all maintained well.
There are many things that must be done when cleaning and
keeping your pool comfortable and safe. These plans are especially critical for
ensuring that nothing difficult can come about when trying to keep your pool
ready and functional for any plan.
Keep Plant Debris Out
The first plan for maintenance should involve looking at how
debris can come about in your water. All plant debris should be cleaned out
properly. Several things should be done:
· Use a proper net or other material to clean out any leaves or other plant materials that get into your pool.
· Prune any trees or other surrounding items that are near your pool.
· Use a proper pool cover while your pool is not in use. This for cases where you have a large number of trees or other plants in a local area.
Take Care of Your Pool Cover
A great pool cover can last for years to come and will ensure that your pool is secured when you aren’t planning on using it for a while. But in order to make it work, you must check on the body of the cover. Review its surface and make sure it is brushed off regularly.
Use a shop vacuum or pump to clean off the cover before
taking it off. This prevents any water or debris on its body from getting into
the pool water.
Analyze the pH Regularly
Check on the pH of the water in the pool on a regular basis.
Do this once or twice each week. The pH should be from 7.2 to 7.8. There are a
few things that can be done as you need to adjust the pH:
· Add soda ash when you need to raise the pH. Borax may also work.
· Sodium bisulfate or muriatic acid should be applied if you need to lower the pH.
· Check on how well the chlorine responds to the changes in the pH. It works best when the pH is from 7.2 to 7.8.
Vacuuming Your Pool
A vacuum can help you with cleaning a pool. A basic personal
pool vacuum should be good enough but there are a few points that must be
followed if you are going to vacuum your pool the right way.
· Use a hose on the vacuum to clear out the skimmer basket. Dump the contents of the basket and vacuum out all the parts in the area so it is fully open. This should be done each week.
· Use a slow linear motion as you
use the vacuum. This is similar to what you would do when working on a regular
· Avoid lifting the vacuum head until you go to the filter slab. Open the valves that might have closed.
· Clear out the drain at the bottom. The drain must not have any obstructions inside its body.
Add a Brush
A brush should be used around the walls and floor of your pool. As you remove the water, brush off the surfaces before you start vacuuming. This should remove any calcium deposits stuck in the area. As those deposits are cleared out, the potential for algae and other growths to form is reduced.
Try using a soft brush if you have tiles that might be sensitive. A less sensitive brush should help to loosen old deposits without damaging the tiles.
How Much Water IsNeeded?
Check on how well you are adding water into your pool. It is often easier for water to take in outside materials and debris if it is too high up. Keep the water filled up with a six-inch gap between the edges of the pool and the actual pool body itself. This should be enough to keep the water comfortable and less likely to be dirty while keeping the pressure on the pump and skimmer from being too high.
Even with this, you must still keep the pump covered. The pump will not work properly if it is too dry. Keep the water level above the skimmer as well. It will not take in debris if it is too low.
Check Your Filters
The filters around your pool should be checked weekly. This is regardless of the materials used in the filter. Review how well the water moves out of the filter. You might have to clean out the filter if the water is not moving as quickly as it should.
Any sand or other physical substrates will have to be replaced inside filters as well. For a sand filter, you must replace the sand every five years. For diatomaceous earth materials, you should get them replaced or refilled every couple of months. There is a potential for some of these materials to break down prematurely, thus keeping them from being overly effective when cleaning out your pool.
Check the pressure gauge and flow meter on your filter regularly. You must clean out the area if the difference between the two gets to be 10 to 15 pounds in intensity for every square inch.
Test and Fix All Leaks
The last point to use is to fix all leaks that appear. While
a professional is typically required to help you patch up leaks, you can test
your pool for leaks by using a bucket test:
· Fill a bucket about three-quarters of the way with water.
· Place the bucket on the pool surface. Keep a note of the water line as you do this.
· Check back in a few days to see if the water inside the pool has evaporated at the same rate as what is in the bucket. If the water in the pool has declined substantially then you must contact a professional for added help.
All of these plans are important for when you are aiming to
get your pool fixed. Be sure you look at what you can do to keep it all
protected and comfortable.
Tuesday, 23 May 2017
Swimming pools are a good way to stay cool and have fun during the warmer summer months. Since pool sales have risen through the years, increasingly more people are learning to maintain while keeping their swimming areas up to par for their family members and friends.
Whether people have selected an above ground pool or perhaps made the commitment to dig in-ground, there are standard guidelines each, and every owner should recognize when it comes to the maintenance and servicing.
Pools which have turned green or black are signs that you have been ignoring the cleaning process and requires particular treatment plan well before you can use the pool again. One thing owners should do clear out all large and smaller pieces of debris that can be caught using a net.
Those big leaf nets are often extremely effective in removing debris than an essential skimmer. Although these nets will certainly stir up the water in the pool, the water color can start to look even worse than it did before; however, all physical matter has to be taken out of the pool waters.
It is essential for owners to avoid vacuuming the bottom level of the swimming pool if the bottom surface is not noticeable or if perhaps covered in debris. In case debris is located on the bottom, it might at some point clog up the vacuum, costing hundreds in repairs or even having to replace it.
Alkalinity and pH levels must be looked at, managed, and modified. If owners are unsure regarding the content of the water, many local pool businesses can come out to test the water or allow for customers to bring in samples so that a diagnostic test can be given.
If your pool is incredibly filthy, owners may need to put gallons of chlorine over a range of days so that the water can go back to its standard level. Local pool companies may also be prepared to help with customized chemicals and treating the pool, but chlorine is essential for a very filthy pool.Many owners can operate a fighter for 24 hours and then backwash for 3-5 times a day to get quick results. Although green or cloudy blue water can quickly clog up a swimming pool filter, the greater times a swimming pool is backwash, the quicker it will clear. With the addition of chlorine, the pool really should clear up in just a week's time.
Swimming Pool Water Maintainance
Depending on the depth and design of the swimming pool both adults and children can make use of them. Due to these functionalities, high standards of hygiene need to be observed when maintaining or cleaning the pool. Deployment of the proper water chemistry is one of the vital steps that should be initiated to assure that the pool water is clean and safe for swimmers. One of the most recommended chemistry is the use of 3-inch chlorine tabs because they are so effective when used.
Taking effect as they instantly dissolve when placed in the water is yet another great benefit. Purifying and disinfecting the water at the same time is what they are used for so as to make the water bacteria free and nice and clean. During this procedure, the 3-inch chlorine tabs assure that all bad components in the water or any water contaminations are dealt with accordingly. This means that even if you get one or two sips of the swimming pool water, you can't be affected by those germs. The entertainment of the swimming pool could become a source of diseases and other problems instead without using the proper chemistry to sanitize the water which is very essential. For the application of these tabs, you don't have to be a pro to handle this procedure. Depending on the volume of water these tabs can be applied by automatic chemical feeders.
Also, some floating chlorine feeders can be utilized to implement the 3-inch chlorine tablets. They are also efficient and are very easy to use. These tablets are widely used by many experts since they produce the best results right from application to high or faster dissolving power. Not like other chemicals, they dissolve evenly which prevents any undesirable response of the eyes of the swimmer. A change of the swimming pool water should be accomplished from time to time so as to have a fresh start. This is also an essential aspect of when treating water with chlorine for drinking.
Another thing that makes the chlorine tablet more efficient is that when the swimmers tear more closely match the ph level of the swimming pool.It is necessary to keep testing the pool water for proper Ph balance and chlorine content. The frequency of circulation, number of users and the amount of chlorine used to treat the water are all factors that influence the ultimate balance o the water and its chemicals. Testing the pool water frequently and even taking regular samples to the dealer centers will help you keep your pool healthy and safe.
The chemistry of the pool depends upon the variety of chemical ingredients that comprise the maintenance plan of the pool. These include regular concentrations of chlorine and sanitizers. The health of the pool water depends upon the concentrations of individual chemicals. While too much of these chemicals might be debilitating to the skin of the users, too less might render the whole purpose inconsequential.
The filtration of the pool is one of the most important points of a proper pool maintenance strategy. Every pool has its filter, and it can be of many types. These filters need to be drained and cleaned regularly. They do not just assemble debris but also work on collecting microscopic dust and impurities in the water.
Also, the filter needs to be frequently cleaned. You should avoid excessive backwash of the filters since that will only hamper with the productivity of the filters. You can know it is time to backwash the filter when the water pressure in the filter reaches to about a range of 8-0 psi. The filters do not extract oils or a minuscule debris, so it is important to backwash and picks out the debris from the filter before reattaching it to the pool.
Friday, 17 March 2017
This means that taking a cooling dip in a swimming pool after a long day's work is an extremely gratifying experience, whatever the month. With land prices being so high, a home swimming pool is very much a luxury item. Allowing it to start looking like something a crocodile will be at home in is a terrible misuse of such an asset, yet many poolowners find their pool's condition deteriorating despite their best efforts. If you are responsible for maintaining a shared swimming pool, such as for an apartment block, this will mean many people getting angry at you for making them risk kena some kind of disease!
Save Yourself Some Frustration and Money
The truth is that maintaining a pool is much more complicated than tossing a handful of chlorine into it whenever you remember.
· Water quality is influenced by many different factors, and any action you take might end up backfiring unexpectedly.
· Once things start to go bad, trying to fix them without knowing what you're doing will probably make them worse.
· Eventually, the pool may reach a state where it can't be fixed and the only solution is to pump it dry, scrub it by hand and start over. With Singapore's water supply being somewhat under pressure, water prices will be increased by 30% starting from June, so re-filling a pool will cost you.
· Contracting a pool service company who's on the ball will prevent all this from happening, saving you money in the long run and ensuring that you can use your pool year-round. Whereas you buy pool chemicals by the kilo, they probably buy it by the hundreds of kilograms, leading to cheaper rates.
Some Aspects of Water Quality
When professionals talk about taking care of a swimming pool, what they really mean is taking care of the water. The physical construction is generally going to be okay unless an earthquake passes through; so keeping the water healthy to swim in and pleasant to look at is 90% of swimming pool maintenance. Here are only a few of the factors that need to be monitored and controlled on a regular basis:
· Alkalinity. The pH of swimming pool water can change very quickly under certain circumstances, and unskilled intervention will often not be sufficient to put it right. If the water is too alkaline, the water will start to look milky and limescale will form on tiles and within the pumping equipment. Too acidic, and the pool liners, pipes and pump parts will start to corrode, and the water might even sting your eyes.
· Hardness. All water contains some level of minerals, particularly calcium and magnesium. In a swimming pool, these are left behind as water evaporates, leading to a gradual increase in these levels. This is a prime cause of scale formation over time, and will leave swimmers' hair feeling “scratchy” even after shampooing.
· Chlorine Levels. Too little chlorine in the water, and bacteria and algae will start a party in your pool. Too much, and the water will be dangerous to swim in, especially for children. Unfortunately, sunshine, evaporation, temperature and other factors all influence the rate at which the concentration of chlorine in your water decreases. Chlorine is not the only chemical used to sanitize swimming pools, nor very effective in the case of certain microorganisms, but you can't do without it.
These four are the most important, but many other elements go into making a pool happy and healthy. The average homeowner has his own job, and cannot be expected to have the knowledge, experience or specialized chemicals to respond to every contingency. Professional pool maintenance companies not only possess these advantages, but also the ability to test water for a number of quality indicators. If a problem has become so bad that you can see or smell it, remediation will be that much more difficult. Regular visits can catch developing complications while countermeasures are still easy to implement.
Why Use a Swimming Pool Service?
If you've been managing your home swimming pool for years without problems, feel free to keep doing so. You obviously know what you're doing. However, if your pH levels keep swinging up and down like a drunken monkey, a little skillful help might be just what you need. A pool which you can't use two weeks out of four is nothing more than an expensive garden ornament – if you want to get the best out of your investment, spending a few dollars a month is truly worth it.
· Institutional swimming pools, where a large number of people get into the water daily, are notorious health hazards. You can ask people to shower before entering, some of them won't. You can ask people not to swim while sick and not to relieve themselves in the water, they will anyway. The results will be eye, ear and stomach infections, if not worse.
· Not everyone has time to spend on home pool maintenance. If you can earn more money in the time you spend scooping up leaves than a service asks, you are actually saving by paying them.
· Contracting a good pool service is almost certainly cheaper in the long run. Not many people have the skills to take apart and service a pump for even a home swimming pool, never mind a larger multi-stage system. Proper maintenance prevents avoidable purchases.
· A little knowledge of chemistry can go a long way. Adding a little of a few substances you might not be familiar with can reduce the need for more harmful chemicals, leaving you with water that's easier on the skin and eyes while still being pure.
General Tips for Using Your Pool
· Asking swimmers to shower before entering the pool is a good way to reduce the amount of dirt and bacteria that enter the pool in the first place.
· If you maintain your own pool, try to make it a daily chore rather than aiming to balance everything once a month. If you constantly have to resort to shock treatments, everything is not shiok.
· Your filter is what keeps your pool clean, which means that it will become dirty itself. Even if you don't have much time to spare, make a habit of cleaning out the leaf basket.
· At the very least, you should get a professional to audit your pool once or twice a year. They know what to look for when inspecting piping, filters and many other components you probably prefer to ignore. Little things like leaks or a pump that “sounds wrong” can lead to serious consequences if not addressed in time.
Owning a home swimming pool is a source of either constant joy or constant frustration, and the only difference lies in the quality and frequency of maintenance and cleaning. If you can't or wont do it yourself, there are plenty of companies in Singapore who can take care of it for you, and their rates are lower than you probably expect.
Sunday, 26 February 2017
If you have your swimming pool you will know how important it is to carry out regular swimming pool maintenance and pool servicing to ensure your pool is kept in the best possible condition and is clean and safe to swim in. If you have an outdoor swimming pool for home or business purposes, then you will need to carry out regular water testing, winter close downs and summer start-ups. These can be time-consuming jobs to do yourself so employing a swimming pool maintenance company will take the hassle out of your hands.
A swimming pool maintenance company can provide a level of service to meet your exact needs. If you just want pool servicing a couple of times a year, they be happy to do that. If you need repairs carrying out such as a new water filter, pump, leak detection, swimming pool cover repairs or replacements fitting and any pool plant room equipment servicing and replacing, then they will be able to help. They may also offer services such as cleaning and maintaining surrounding pool areas and patios and servicing and repairing spa's and hot tubs.
Most swimming pool maintenance companies will stock a wide range of swimming pool accessories such as new filters, pool covers, nets, brushes, telescopic handles, vacuum hoses, pool thermometers, automatic pool cleaners, hot tub accessories and many more items. If you are thinking of having a swimming pool installed in your home or garden then you need to consider the up keep and maintenance costs involved. Once a swimming pool is installed there will be regular costs involved to keep it in good working order and to ensure it is safe to swim in.
Many swimming pool maintenance and pool servicing companies will be available for emergency work such as pool leaks if you are losing a lot of water. You can find companies that carry out swimming pool maintenance in your area by looking in your local business directory or by searching online to find contact numbers.
The Importance of Swimming Pool Maintenance
Most pool owners ignore regular maintenance and cleaning it is likely that algae will build up. If there is an algae build up on the pools surfaces it will become risky for people to use it. If you choose not to perform regular sustaining you are also asking for future repairs and costs that are avoidable. If you are looking to keep your pool in tip top shape but want to avoid the additional work it is best to hire an expert in pool maintenance to open your pool, clean the pool regularly and close the pool at the end of the season.
Swimming Pool Maintenance is Crucial
All in-ground swimming pools, especially gunite pools with a plaster surface, need regular maintenance. Even if your family is not using the pool on regular basis upkeep is necessary. It is necessary to shock and sanitize the pool water in order to keep it safe and clean. When this process is not done regularly the water can hold bacteria therefore making diseases more communicable. Chlorine treatments break down the bacteria buildup. Shocking the pool frequently, even when the pool is not being used every day will prevent illness from spreading from the water in your pool.
Not only does the water need to have chlorine added and water shocked regularly the filter and pump systems also need to be cleaned frequently as well. As a pool owner you need to also check the performance on the pump system and make sure the water pressure is normal as well. These pieces all work together to prevent future issues.
When we are talking about regular analysis of the chemistry of the pool water we are talking about testing the water twice a week throughout the summer. Check the waters alkalinity and pH balance; if you need to add chemicals be sure to do so in the evening when the pool is not in use but the systems can be run to help cycle them.
At the opening and closing of the pool for the season certain maintenance should be scheduled as well. When opening the pool in the spring and closing it in the fall you need to analyze the pools plaster. Check the pools plaster or leaks and cracks. Check the tile out around the pool for damage as well. In order to keep the plaster and tiles in shape regularly clean those to prevent any algae build up. You can do this by brushing the surfaces and vacuuming the debris that has built up. An abundance of leaves and bugs should be cleared using a skimmer to clean the surface. If you live in an area where this is really troublesome consider enclosing the area with a screen enclosure.
Keeping up on your pool maintenance is one of the key elements in the usability of your pool. Without regular upkeep pool owners set themselves up for larger more time consuming, expensive repairs later on down the road.
Some simple tips for pool maintenance Singapore are:
-Keep the skimmer basket clean
It is used to keep the leaves, dust and debris away from the swimming pool but if it is full of them the basket may break affecting the pool pump or jamming it. If you are not familiar with the cleaning process then contact pool cleaning companies.
-Cover the pool when not in use
Pool service in Singapore provides services in pool cleaning, pool maintenance and pool construction. All the services are affordable and come in different packages so that you can avail them as per your requirements.